Cantilever gate with pedestrian gate and fencing

A truly turnkey project. For our client from the village of Liptovský Ondrej, we prepared our specialty in the form of a cantilever gate with full automation in a rising plot. A gate customized for the given type of land. We produced and installed special brackets for polyamide carriages and drive for the atypical gate. Including the gate, we manufactured and delivered a barrier with stainless steel fittings, fence parts, and anchor posts for the client. We turned the project into an interesting lamella design in anthracite color.

Client: Ing. Róbert K.

Location: Liptovský Ondrej

Date: 11/10/2023

Order from the customer

The client contacted us with a specific request. Where other professionals in our craft run away, we come with open arms. The client was interested in the production and installation of the project in an atypically located plot of land. Since we have already produced and installed projects of a similar type, we had prepared for the client various photos and videos of how his project could work and look. The client was identified with our proposals. During the meeting, we needed to carefully measure each opening and, above all, the slope of the land. For such targeting, we use a special laser measurement of the slope of the land. In the last step, we agreed on the pattern, color, and accessories with the client. After agreeing on all the details, we were ready for production.


Dimension of holes

Cantilever gate – 6000mm x 1800mm

Pedestrian gate – 1000mm x 1500mm

Fence panel – 1300mm x 1500mm

Pillars 3 pcs – 100mm x 100mm





RAL 7016



ROGER drive (LED beacon, photocells, controllers)

WIFI control of the gate

System for rising land

Stainless steel fittings

Implemented mailbox

Cover system

Project realisation

The entire production process begins with our designer. In such projects, communication, and thoroughness at every step are very important. As a result, the project must exactly copy the terrain. Thanks to our certified and experienced workers in every position, we successfully moved the project through every production process. The last step was powder coating. After its successful completion, we agreed on an assembly date with the client. A hydraulic arm helped us during the assembly because we had to adjust the gate several times to make it work at 100% in the end. At the end of the day, we successfully handed over the turnkey project to the client. We believe that this project is proof that we at VISIO are not afraid of challenges.

General view

General view

Cantilever gate

Cantilever gate

Cantilever gate

General view from the inside

Brackets for polyamide carriages and drive

Pedestrian gate with fencing

General view from the inside